Announcement

Collapse
No announcement yet.

18” Escort Wheels spacers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 18” Escort Wheels spacers

    Just wondering.

    Just bought a set of 18 inch Escort wheels they need spacers to stop my brakes hitting. what size spaces do you use ?

    Photos would be good with what size spacers.

    Thanks in advance


  • #2
    Havent got photos at the moment but I have 6 pot calipers with 362mm discs and I put on 3mm spacers which allowed a 3-4mm gap from the face of the calipers.

    Comment


    • #3
      Yeh I had to use 3mm spacers 2, as mine was touching my 6 pots.

      Comment


      • #4
        3mm spacers on the front for 355 6 pots, nothing required on the rear for 330 4 pots
        Attached Files

        Comment


        • #5
          Rear
          Attached Files

          Comment


          • #6
            Lovely thanks chaps, are there different off sets for them.

            Think.... i’m not sure though mine are the first sets that came out as they’re made in the UK, so it says stamped in the wheels


            Comment


            • #7
              the very first 18” came in 2diff offsets, the ones off here though were all 18x9 and et20 , if you have the orig copys then you may need a bigger spacer than mentioned. i had some once and they wouldnt clear my ap4 pots and 330 so sold them on

              Comment


              • #8
                I got ap 6 pots with 360mm discs and not needed spacers for mine??

                Dave.

                Comment


                • #9
                  think hes on about the very first copies from yrs ago. not the 9””” inch wide ones

                  Comment


                  • #10
                    If I remember correctly the first batch of reps were made (or sold) by prestige wheels and sold through eBay, they were standard et25 offset.

                    Comment


                    • #11
                      Yeah I’m sure I’be got one of the first sets 8 x 18 is made in UK stamped in the back.

                      they fit over my brakes just need to space them away from the hub like has been said only 3 or 4 mm needed

                      but i dont want the wheels to sit in to far in the wings,
                      the centre of the wheel only comes out 35 mm till hit hits the hub.

                      My comps are like 70mm if you can see where I’m coming from.

                      Is it just a case of getting 30mm spaces or is that going to be hideously stupid ?

                      Comment


                      • #12
                        ah right.

                        tbh, I would rather get the wider set than run spacers.

                        Dave.

                        Comment


                        • #13
                          If you need some spacers Craig give me a shout
                          XYZ Fabrications
                          Bespoke, custom and low batch quantity cnc profiling, engraving and fabriactions, 07917757695

                          Comment


                          • #14
                            Cool thanks Dave I’ve sent you a message, you’ve probably read the message before you read this

                            Comment

                            Working...
                            X