Announcement

Collapse
No announcement yet.

Exhaust front pipe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tech Question - Exhaust front pipe

    Hi guys, does anyone have a pic of how the front pipe goes up through the bulkhead to get to the turbo joint? There doesn't seem to be much room to get it in there. And where they mate together should there be a gasket, I don't remember having one as the mounting is sort of conical where it joins the flange on the exhaust.
    Cheers
    Trev.


  • #2
    no gasket needed trev, you need to have the car quite high up off the floor to be able to twist and feed the pipe though, thats where my pit comes in handy. try and keep the flange at the correct end and twist it until you can feed it through the gap

    Comment


    • #3
      I don't suppose you've got a pic of it sat on without the heatshield have you Nick?
      Cheers
      Trev.

      Comment


      • #4
        It will go in as Nick has said.
        once in leave it loose at the manifold end until all happy with the eay it sits everywhere and not rubbing in the prop etc....can then tighten up the 3 bolts on the front pipe.

        Dave.

        Comment

        Working...
        X