Announcement

Collapse
No announcement yet.

300mm rear brake conversion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dfp454
    replied
    I use AP 300mm on the rear with standard rear brakes. The brackets came with the discs. This kit i bought many years ago from AP direct.

    Leave a comment:


  • Dave
    replied
    Originally posted by Dan Le Moignan View Post
    Rotors are 43 each inc delivery and use standard Caliper
    hi Dan

    yes sure I’d be happy to do something for a group buy

    I’ll wassap you


    cheers

    Leave a comment:


  • KR54321
    replied
    I have bought 300mm rotors from HiSpec, I think, as it was years ago, not very expensive. Designed the bells myself. The brackets were made by Dave.
    All for standard calipers of course.

    Leave a comment:


  • Dan Le Moignan
    replied
    Sorry Joe wrong ones but can get 298 or 310
    Attached Files

    Leave a comment:


  • Joe-Tait
    replied
    Dan those discs are 32mm you need 20mm for STD cos vented rear callipers

    They are available but more like 80-90 a disc

    Leave a comment:


  • Sunnysidebb
    replied
    Ive got AP discs and bells with Reyland adaptor brackets and standard calipers on the rear. They work well. Not sure of the diameter but I think there 295mm ota on 19 inch Super's.
    Back in the day I think the whole set up was from Reylands.

    Leave a comment:


  • Turbo Lag
    replied
    Sounds good.

    Leave a comment:


  • Dan Le Moignan
    replied
    Rotors are 43 each inc delivery and use standard Caliper

    Leave a comment:


  • Dan Le Moignan
    replied
    Was thinking we could ask Dave what price he could do a kit for?
    Could use the below wilwood rotors which are cheap, then Dave make bells, mounts and he already does the splash guards.Dave
    Attached Files

    Leave a comment:


  • Turbo Lag
    replied
    What happened to the kit I know it's been a while

    Leave a comment:


  • Turbo Lag
    replied
    Your a star I could never afford the traditional 300mm upgrade kit

    Leave a comment:


  • georgie1
    replied

    Leave a comment:


  • coswurv
    replied
    Sent a template off to the laser cutters today so see what pricing they come back with, if its reasonable ill have a few done and make up some brake kit sets if anyone's interested, will consist of discs (grooved, grooved and dimpled, plain) brackets, spacers, nuts and bolts, braided hoses and some brief instruction on what mods to do.

    Leave a comment:


  • Turbo Lag
    replied
    Originally posted by coswurv View Post
    No, just always been involved in fab work etc from a young age, I may send the template off and have a few sets laser cut, so I could offer brackets, discs, hoses, nuts and bolts. All that would be left for the user to do is disc off part of your dust shield and take a bit out of your calliper carriers.
    That would be great

    Leave a comment:


  • Cochyn
    replied
    Very clever of you, make some decent money on the side that way. There's a few 2 piece ST170 discs going for sale from time to time, so simple to have a brake/bell upgrade instead of spending silly money for them new in a kit

    Leave a comment:

Working...
X