Oil return Borg Warner

[sydneyvon]

Hi chaps

I want to use the 3/8 ntp fixing on the turbo for the oil return to the sump does any one know if there's a generic hose already made and where to get one from.

Cheers si

[c20tbo]

Hi chaps

I want to use the 3/8 ntp fixing on the turbo for the oil return to the sump does any one know if there's a generic hose already made and where to get one from.

Cheers si

I'm sure most just measure and have one made up, I'll need to do this myself soon, is that 3/8 NTP for all EFR's? I've a fitting on my sump ready also

[sydneyvon]

I'm sure most just measure and have one made up, I'll need to do this myself soon, is that 3/8 NTP for all EFR's? I've a fitting on my sump ready also

I'm not bothered about pipe length that can be cut.

More concerned about thread style and length into the turbo basically the person I know who can make the pipe wants to see the Turbo but I can't be arsed it's bolted to the engine

[Wesley P.]

I had a bit of trouble mounting mine as the area is pretty tight. In the end I used a threaded flange and a 90 degree elbow, silicone hose.

All 3/8''

[c20tbo]

Ive have a -fitting on my sump and i'll use a converted fitting to - size off turbo, I wont use a flange

[sydneyvon]

Hopefully sorted

Went to proline today and had a pipe made up and bought a heat sleeve to go around the pipe.

3/8 ntp on the turbo and bare end/ jubilee clip at the sump

Si

[AJC]

I have a batch of 20 being made, oil return pipe, correct flange and new pipework