Tweet
A friend need New clutch in a 2wd. T5 box, and oe flywheel. Whats the best option?
-
sachs 765 pressure plate on lowered flywheel and sintered clutch.
IŽll use it on both my cosworths, the sierra with a 4paddle and the escort with a 6 paddle with springs in the centre.
It can withstand about 1000nm -
Where would you get this kit from alsigpic
Built by my self dp motorsport 700.6bhp 520ftlb efr9180 2.4bar m.a.d mapped flat out is the only way
Comment
-
Was my first tought to the sachs, but unsure how engine is balance... We can get a custom 9mm disc to get around the modding of flywheel.
Know a swedish company do complete with flywheel. Will try to find link again...Comment
-
Great info there thank you...Comment
-
on the sierra I have this: http://www.dli-teknik.se/index.php?s...d=7556&lang=en
but with that clutch you have to mill down the flywheel yourself, just test the clutch where the peak pressure is and lower the plate so the clutch correspond to that
Comment
-
Thats why we look at getting a 9mm thick custom plate, know this is done with Great sucsess before. So think. IT will be best option. I will also go for these clutch on some of mine, since need to change on some of them.Originally posted by Big_Al View Poston the sierra I have this: http://www.dli-teknik.se/index.php?s...d=7556&lang=en
but with that clutch you have to mill down the flywheel yourself, just test the clutch where the peak pressure is and lower the plate so the clutch correspond to thatComment
Comment