Running very rich?????

[COSSIEDRIFT]

Just fitted msd 380+ chip and my emmisions readings are 11%+ co 4000+ ppm hc its that bad its smoking and hurts your eyes lol

Any idea's i tried ringing them earlier but they must have been busy. Going to try a new lambda sensor tommorrow if i can get one. When i unplugged the lambda it went down to 5+% co. Is this normal??

Thanks Danny

[luca]

Get it set up Dan would say pop to Jim but I need him on mine the next 2 weeks!

[COSSIEDRIFT]

its going to totd next thursday mate but fueling none adjustable on these old bones aparently

[dom123]

you may have the scrol of the map in the wrong place.. the ecu screw needs to be turned 5 times clockwise then 2 turns anticlock wise, then it needs to be fine tuned from here... the co reads dont mean much it the air fuel ratio thats important.

it should be 1.5 % co with the lamba connected

and around 3.2 diconnected on a mot machine...

i fun mine around 13.6 afr on idle which is around 1.7co i think then when it hits boost its in the 11's if you set the idle co to low you will be lean at the top!!

you need a wideband gauge if your seting the chip up your self mate..

[Ben M]

dom he is running p8 so no co screw?

luke theres nothing to adjust without mapping as far as im aware

[dom123]

sod going to totd, if your car make 300bhp and your shocked then you ask him why's it down on power, he'll shrub his shoulders and ring msd as he knows fuck all.. and he spun a shell on my escort on his dyno mapping it continously all day and he cooked the bottom end...

take it to ian at power engineering or if you can afford the fuel go to reylands!!

[dom123]

dom he is running p8 so no co screw?

luke theres nothing to adjust without mapping as far as im aware

ok what fuel reg have you got has someone played with the screw???

[Ben M]

thats the thing its std too so non adjustable ive got fuel pressure gauge im thinging its worth checking

what afr gauge do you run dom? or recommend?

[dom123]

a stack one i'm very happy with... mike r does these at a good price the cheapest i believe...

[COSSIEDRIFT]

Oh and dom you were right i munched a planet wheel in the diff on the way home from the meet lol

[dom123]

well it may be a faulty map sensor? water temp sensor??

[Ben M]

yeah think im gonna buy a stack sod letting a tuner cane the shit out of it and not know what he is up too

[Ben M]

new water sensor and map sensor

only thing is it was shit co before blacks so thinking its lambda as thats really the only thing left that hasnt been replaced

[dom123]

Oh and dom you were right i munched a planet wheel in the diff on the way home from the meet lol

sorry to here that mate.. get a welded 7.5" on there with 2wd shafts and 2wd hubs and do not run r888's for drifting they are far to gripy for any diff!! if you do these mods and you run 380bhp you wont be able to brake you transmission!!

[dom123]

new water sensor and map sensor

only thing is it was shit co before blacks so thinking its lambda as thats really the only thing left that hasnt been replaced

i prity sure if the lambda is disconnected it should drop back to 3.0 co ish... is the loom in good condition??