where to get longer studs and nuts for grp a wheels

[richyx]

My new comps (inch had metal inserts in them but they just went straight on. i just bought new blue nuts. is this right???

yor std wheel nuts will fitm my std wheel nuts and studs fit my 9s and 10s

the wheels i have for my sierra are the old style mo 6 spoke which have different sleeves to what my new style have, hence i need different studs and nuts

[cosmo]

My new comps (inch had metal inserts in them but they just went straight on. i just bought new blue nuts. is this right???

They need to be going on 12 turns min fella for M12 x 1.5


edit.... That is ISO Standard

[RWD_cossie_wil]

Rally Design in Faversham do them for 90p each, in plus 25mm or plus 50mm.

[cosmo]

Rally Design in Faversham do them for 90p each, in plus 25mm or plus 50mm.

Cheap as chips


NO, HANG ON, they ARE cheaper than chips

[ossie cossie]

12 turn at 1.5mm thread is 18mm. I will check, and i think the taper is 60 degree on both wheel and wheel nut?

[cosmo]

12 turn at 1.5mm thread is 18mm. I will check, and i think the taper is 60 degree on both wheel and wheel nut?

Thats it Tony.

ISO requirement for attachment is 1.5 times the dia of the bolt

so

6mm dia should be 9mm of thread

8mm dia should be 12mm of thread

10mm dia should be 15mm of thread

12mm dia should be 18mm of thread

etc etc ..........



and as our studs are M12 x 1.5mm pitch we need 12 turns of the wheelnut

to be holding on 18mm

[FletchCossie]

When I got my new style Mo's I ordered the new, correct bolts from Reyland Give Martin a call on Monday and see what he says

[ksa-cossie]

The longer studs are from a transit iirc.

[richyx]

ok so studs are easy to get, ill get the 25mm longer ones, but what bout the nuts

ill get a pic up later to show what insert i have in the wheels

would these the type of nuts i need?

http://www.rallydesign.co.uk/popup_image.php?pID=4667

[cosmo]

ok so studs are easy to get, ill get the 25mm longer ones, but what bout the nuts

ill get a pic up later to show what insert i have in the wheels

would these the type of nuts i need?

http://www.rallydesign.co.uk/popup_image.php?pID=4667

not 1/2" UNF though richy

[richyx]

yeah pic was just of style not thread i would i need