8.5" front diff Where from??

[RSescorts]

Jacko,

not sure if this is any good for you
here's a link to a 7.5ffd, with cross shaft sump etc...
http://www.rally24.com/transmisjoner...rth-28450.html

same guy also has a ffd box aswell.

cheeRS
Ken

[WENNY]

same as mine that lot

[jacko996]

Jacko,

not sure if this is any good for you
here's a link to a 7.5ffd, with cross shaft sump etc...
http://www.rally24.com/transmisjoner...rth-28450.html

same guy also has a ffd box aswell.

cheeRS
Ken

Cheers Ken

Unfortunatly these only run 3.9 or 4.4 ratio as does the 8.5"

I am running 3.6, which means I would also have the expense of doing the drop gears

Although not too sure on that cost

[Mike Rainbird]

Cheers Ken

Unfortunatly these only run 3.9 or 4.4 ratio as does the 8.5"

I am running 3.6, which means I would also have the expense of doing the drop gears

Although not too sure on that cost

It would mean more than that, you would have to change the gears as well, as you'd be on the limiter in top at the fast circuits with a drop in gearing, so you'd have to increase 5 and 6th to compensate.

[SCS j1mbo]

Not just increase 5/6th mike, different input ratio would be the way to go so all the gears are bumped up to suit the lower ratio diffs.

[Mike Rainbird]

Not just increase 5/6th mike, different input ratio would be the way to go so all the gears are bumped up to suit the lower ratio diffs.

So even MORE money then .

[jacko996]

Another 1K for the ratio alone

[Mike Rainbird]

Stick with the R&D and go 60/40 .

[SCS j1mbo]

Input ratio is 1050 plus fitting

I'm with mike dave, 60/40 r and d should be fine!

[WENNY]

ide stick with the r&d with the mods mate aswell