Cheap front brake upgrade?

[mboon]

Anyone know of a decent upgrade to the front of a Escos without going nuts on the wallet?

Found some 4 pot calipers with 330mm discs that will go straight on.

Anything else?

ta

[adamescortcosworth]

Anyone know of a decent upgrade to the front of a Escos without going nuts on the wallet?

Found some 4 pot calipers with 330mm discs that will go straight on.

Anything else?

ta

I fitted BMW 728i brembo callipers and focus rs 330 mm discs, and you can get the brackets off eBay for the callipers . All in cost me 250

[Turbo Lag]

I want a cheap option for the rear brakes as well

[mboon]

I fitted BMW 728i brembo callipers and focus rs 330 mm discs, and you can get the brackets off eBay for the callipers . All in cost me 250

Are they the same 4 pots you find on the 840i?

Do you have a link to the brackets bud.

Did you have to upgrade the master cylinder? I bought the 840i brembos for my M3 and was told the master cylinder might need upgrading?

Any photos of the kit fitted?

[mboon]

bugger, just checked, your running 2wd front hubs where as I am still running the 4x4 front setup bugger!!!!

[m19rcj]

bugger, just checked, your running 2wd front hubs where as I am still running the 4x4 front setup bugger!!!!

Check out this item number 221179058080, auction has finished but may be of some help

[mboon]

Check out this item number 221179058080, auction has finished but may be of some help

Just emailed him. Thanks for the heads up. Looks perfect for what I want

Anyone got a photo of what a 330mm disc and 4 pot looks like behind a rondell/engel or just on a Escos with a 18" wheel?

[POLARIS ESCOS]

I have a set of the calipers for £200 if you do buy the kit

[mboon]

Is that the 728i 4 pots?

Hardest bit to find at the moment is the brackets to fit a 4 pot to the 4x4 hub. Dont really want to start changing hubs to 2wd etc?

[Cochyn]

Just emailed him. Thanks for the heads up. Looks perfect for what I want

Anyone got a photo of what a 330mm disc and 4 pot looks like behind a rondell/engel or just on a Escos with a 18" wheel?

With an RL7 8x18, but with FRS Brembo's and 325mm x 30mm rotors. Don't look small really, brake really well and cheap as chips!

[mboon]

Cheers bud, looks better than the standard setup and more importantly... Will have BREMBO behind the wheels

[Cochyn]

Yup, rotors are cheap enough to replace too. Reyland do them for £200 a set Plus the Brembo's are readily available off Focus RS's and Fiat Coupe's and the rebuild kits are cheap as chips. Nice little upgrade

[Tkracing]

Would the focus rs stuff fit under stock wheels, ?

[Cochyn]

I've seen them under 16" wheels on RS Turbo's, so I'd assume so with the right bracket. Doesn't Luke have them on his Fiesta with 15" wheels????

[adamescortcosworth]

I want a cheap option for the rear brakes as well

Dont think there is a cheap option for rear ? If there is id Like to know about it