Hydraulic clutch kit fittings?

[pauldonachyrs]

Hi I have a hydraulic clutch kit from mark barber but don't have any of the fittings I have misplaced them does anyone know what fittings and thread size I need for the master cylinder and the slave cylinder so I can make the pipe up?

Cheers

[Mark Barber]

im waiting for a pic off shaun mate so i know which ones are required so i can get them bud

[pauldonachyrs]

Perfect mark cheers

[JohnP001]

Does this help at all?

[m19rcj]

I dont know if your kit is the same as mine but my fittings were 3/8 unf and the rose joint was 5/16 x 5/16 unf

[Scouse]

How much does the clutch kit cost? Thinking of doing mine soon.

Scouse.

[JohnP001]

Looks like £360....

http://www.reyland.co.uk/clutchtransmission/

[Adamski]

How much does the clutch kit cost? Thinking of doing mine soon.

Scouse.

You can make you own for alot less.

[Scouse]

Think I will be making my own!!


Scouse.


Sent from my iPad using Tapatalk

[m19rcj]

Yep its a hell of a lot cheaper making your own kit.

[Adamski]

Yer the reyland kit it good no disrespect but little things like the nuts weren't stainless so going rusty now so they'll have to be changed for stainless now

[Mechanicalrepairs]

What's the job like to do? A pain in the ass or more or less straight forward, my clutch is slipping and wondering if this will help a stiff pedal due to an uprated clutch kit?

Carl

[Mark B]

im waiting for a pic off shaun mate so i know which ones are required so i can get them bud

I saw a thread a while back where you were doing a kit fitted would you supply only as I'm a sucker for punishment

[m19rcj]

What's the job like to do? A pain in the ass or more or less straight forward, my clutch is slipping and wondering if this will help a stiff pedal due to an uprated clutch kit?

Carl

Just done mine, quite daunting drilling the bulkhead, I was shitting myself incase I drilled in the wrong place, if you do it I would recommend drilling a pilot hole first and inserting a steel rod through the pilot to make sure its in the right place. I took a load of pics, will have to upload them at some point, all I have left to do is put the guide on my clutch arm for the slave cylinder.

[Mark Barber]

I saw a thread a while back where you were doing a kit fitted would you supply only as I'm a sucker for punishment

ive sold all the kits i had mark sorry