Brand new Side skirt fitting kit, complete

[Dan]

Dan, he is usualy pritty fast at getting the stuff, so i will wait and see if all the numbers come up trumps, then when i go and collect, i will re order you all the sideskirt parts/ any other bits you need
I also ordered two lots of tank strap bolts, do you need some or did Mark sort you out when he fitted the pump?

Great, thanks mate

Mark did sort them out, what do you get with a new kit, I don't suppose you can still get the captive nut's etc that are in the chassis?

[Dan Le Moignan]

The finis no just brings up the bolt iirc, not a kit with the captive nut etc!

[Dan]

Don't need it then thanks mate, got some new nuts and bolts in there now

[Dan Le Moignan]

Sweet, got the call today, all the numbers i gave are still in stock, so will go down and pick it all up and see how much it comes to tomorrow!, Dan, still want the side skirts parts? i will order them at the same time!

[gaz m]

1667246 x16

nice one

[Dan Le Moignan]

Got it all! came to £134.55, but that was with x2 lots of tank strap bolts and the gasket and lock ring for the fuel pump.
Also some items like 1052229 are min order of 20 as are 1667246.
Some how i managed to end up with the 2 rogue rivets, 1667247

[Dan Le Moignan]

also the door card clips in the pic should have been 1667247 x2 to complete the kit

Are these x2 parts required?, as that no gives the x2 white plastic rivets as shown in Pauls pic!

[Ben Purnell]

Are these x2 parts required?, as that no gives the x2 white plastic rivets as shown in Pauls pic!

No I don't believe they are

[compton2012]

Are these x2 parts required?, as that no gives the x2 white plastic rivets as shown in Pauls pic!

Item 17, finis 1667247

[georgie1]

Item 17, finis 1667247

where you get these pics m8 great info

[compton2012]

where you get these pics m8 great info

the bible for these type of drawings, MC

[Dan Le Moignan]

Deffo seems like a ford fook up on the finis number then, as 1667247 will not support the nut (no18) as the diagram suggests.

[compton2012]

Deffo seems like a ford fook up on the finis number then, as 1667247 will not support the nut (no18) as the diagram suggests.

Sounds about right, especially as there is already a mess up on this anyway with the front and rear clips round the wrong way.

Just had a search to see where else that finis is used, its specific to this application. Escos side skirts and escos side skirts only. Figure that one out