Announcement

Collapse
No announcement yet.

Rear spring removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rear spring removal

    I seem to be struggling to get the rear springs of the escos , ive removed the shocks and everything is freely moving but cant seem to get the spring out , is there anything else I need to remove to work the spring free of the car?

    Thanks
    sigpic

  • #2
    You have to take off drive shaft only loosen one side off fully so its hanging there. I just done this few months ago no other way I'm afraid

    Comment


    • #3
      Originally posted by hughy View Post
      You have to take off drive shaft only loosen one side off fully so its hanging there. I just done this few months ago no other way I'm afraid
      Cheers , thought I might have to take out driveshaft , I assume I take it out the hub end ?
      sigpic

      Comment


      • #4
        Yes hub end on p.side and diff on d.side, that's what I did

        Comment


        • #5
          try just splitting the drive shafts on the cv joints where the torx bolts are as its easier then taking them out the hubs.

          Comment

          Working...
          X