Announcement

Collapse
No announcement yet.

Escos...Bleeding the brakes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Escos...Bleeding the brakes

    Ive never had to bleed brakes before on a car that has ABS , is there a certain way to bleed bakes with ABS or do you still bleed them the same way as a non ABS equipped car?
    I will hopefully have the standard brakes back on the escos at the weekend and obviously will require bleeding
    sigpic

  • #2
    will deffo be in the manual Gaz, just click on the manual you wish to look at.

    http://www.fordrscosworth.co.uk/

    Dave.

    Comment


    • #3
      Originally posted by Gaz w View Post
      Ive never had to bleed brakes before on a car that has ABS , is there a certain way to bleed bakes with ABS or do you still bleed them the same way as a non ABS equipped car?
      I will hopefully have the standard brakes back on the escos at the weekend and obviously will require bleeding
      Its worth reading the manual like Dave says, especially for the rears because there is a knack as they are assisted, so pump themselves through. but the fronts are as normal, start with the closest to the master cylinder first.

      Comment


      • #4
        start with furthest away 1st mate

        drivers rear open nipple touch brake pedal slowly with ign on
        fluid will start to come from nipple once air bubbles stop do opposite side
        then do fronts drivers side 1st as normall turn ign off for this

        then repeat process to be sure

        if unsure call me

        07909 544906

        Comment


        • #5
          Originally posted by Mark Barber View Post
          start with furthest away 1st mate

          drivers rear open nipple touch brake pedal slowly with ign on
          fluid will start to come from nipple once air bubbles stop do opposite side
          then do fronts drivers side 1st as normall turn ign off for this

          then repeat process to be sure

          if unsure call me

          07909 544906
          sigpic

          Comment


          • #6
            Would you be able to do the rears using an Eezibleed kit?
            sigpic

            Comment


            • #7
              no
              may damage the pump

              Comment

              Working...
              X