Tweet
that sounds good then,the m/mart only lifts to 376mm
does it go in under the side skirts ok?
does it go in under the side skirts ok?
-
-
If your car is lowered then it may be an issue Nick, I just drive mine onto a piece of 1/2" wood beforehand.XYZ Fabrications
Bespoke, custom and low batch quantity cnc profiling, engraving and fabriactions, 07917757695
Comment
-
can someone measure the height of it when fully lowered and also the reach? before the side parts start to go upwards if you know what i mean,i need it for a few cars not just mine,but if it will clear mine then it will be ok for the othersComment
-
Mines broken already Ben! Lent it to my sisters BF and he managed to snap a lug which holds the pole to the jack (the twat!).
Its a great jack, does everything its supposed to!
sigpicComment
-
maybe its not so good then
Comment
-
Not really the jacks fault Nick, more a ham fisted dickheads fault...........Still works perfectly mind!
sigpicComment
-
Thats the one I have...........not used it yet though
Originally posted by RS Seat Covers View PostDan, think its around 500mm or just shy of that, its an arcam one will check when I next go out for a smoke
Andy
Comment
-
Some good info there thanks Ben, however, is this not the Jack that Kelv had and all the bearings in the wheels fell out within a year or so of him owning it or something? 
500mm as Nick says is a good increase over the M/Mart ones!
M3 CSL is here!
Comment
-
No, completely different from the machine mart ones...........Originally posted by Dan View PostSome good info there thanks Ben, however, is this not the Jack that Kelv had and all the bearings in the wheels fell out within a year or so of him owning it or something?
500mm as Nick says is a good increase over the M/Mart ones! sigpicComment
-
Huh?Originally posted by Franco View Post
I know the above pictured one is different from the Machine Mart ones but I thought that the above jack was the one that failed on Kelv?
M3 CSL is here!
Comment
-
No, as Kelvins had a solid bar on the front! And I'm sure he got his in machine mart......
The one pictured above as far as I'm aware is different.
anyway, why not try one first before offering opinions. and mines had some abuse already (and the bit that broke doesnt count as we were told how he managed this!).
sigpicComment
-
Of course mate I know who to keep happyOriginally posted by BUSYBOY View Postglad to see you sorted your m8 a jack out Ben
i,ll just keep useing my 2 shitty little ones & blocks of would should i ,lol
its true what si said about you
christ god knows what Si's said but most of its true lol
If you want me to get you one I am more than happy to
Yes it does fit under thereOriginally posted by THE RADMAN View Postthat sounds good then,the m/mart only lifts to 376mm does it go in under the side skirts ok?
will measure the height of it for you Nick, not sure what you mean by the reach thoughOriginally posted by THE RADMAN View Post probably be Friday by the time I get chance to get the measurements but will let you know, working in Wandsworth is killing my bloody social life
how the hell did he manage that mines had a bit of abuse from my mates thinking it would be fun to jack themselves upOriginally posted by Franco View PostMines broken already Ben! Lent it to my sisters BF and he managed to snap a lug which holds the pole to the jack (the twat!).
Its a great jack, does everything its supposed to! nothing broken yet on mine
No the one that broke was very similar to the one above but as Jason said it was the front wheel design that was shit, as he said it had a solid bar at the front without any wheels on the side, this is a much more sturdier jack than those onesOriginally posted by Dan View PostHuh? I know the above pictured one is different from the Machine Mart ones but I thought that the above jack was the one that failed on Kelv? Comment
-
He couldn't get the pole to locate Ben (as the screw had been wound in) so he forced it down, snapping a small, black, plastic locator off the end! the fcukin Div!Originally posted by RS Seat Covers View Posthow the hell did he manage that mines had a bit of abuse from my mates thinking it would be fun to jack themselves up nothing broken yet on mine
sigpicComment
-
thats shocking
make him pay for a new one Jase
Comment
-
regarding the fitting under sideskirts bit-yours isnt lowered though is it ben? ive found the rest of the measurements so its ok thanksComment
Comment