whats the name of that firm that makes the custom exhausts?

[Warren]

The Magnex system is fantastic and has slightly better flow rates than the Mongoose, due to its twin 2.25" system.

And If you can send the cash to ........

FAO of Northern Monkey, C/O Mike Rainbird, 10 Percent Street, Fleecy Lane, Sheep Shagging Land

[Mike Rainbird]

i like a load exhaust tho, can they make a load one

Mike.... would you say that with the spec below that the mongoose would be restrictive?

(copied and pasted from elsewhere)

Baffled big wing sump
lightened balanced and knife edged crank
lightened balanced 2wd fly wheel
ARP bolts
cosworth 7.2:1 pistons
bored ybp block long studded
touring car spec head
RS 500 inlet
8 greens
14 & 15 cams
double springs
vernier pulleys
wrc head gasket
grp A cone filter
grp A breather system
RS500 intercooler
roller bearing T4
wasted spark
WRC braided wiring loom
Air injectors
2wd exhaust manifold

It is purely down to how much boost you intend to run through the turbo. However, the less restrictive the exhaust, the more power you will get.

[jeardley]

It is purely down to how much boost you intend to run through the turbo. However, the less restrictive the exhaust, the more power you will get.

probably 32psi..... do H & S still need my car to make one or can i just tell them my spec seeing as they would have done a few by now?

[Mike Rainbird]

probably 32psi..... do H & S still need my car to make one or can i just tell them my spec seeing as they would have done a few by now?

They need the car, as it is mentally tight to get the 4" down-pipe in place.

[jeardley]

They need the car, as it is mentally tight to get the 4" down-pipe in place.

Cheers mike, think i'll be speaking to them tomorrow

[jacko996]

I've had mine a few years and it's been on and off more times than I'd care to mention

I'm sure I paid £1200 for mine from HW&S it's had a few mods too

£1200 for mine too, work of art , mines been on and off loads as well, and fits back perfectly every time

Warren, must call you soon!

[Mike Rainbird]

Warren, must call you soon!

He prefers "Northern Twat", as opposed to "soon", as "soon" is just what his other half calls him (however, she usually preceeds it with "cums too" )!

[luca]

I chirp up here!

From the systems i have seen from H+S i have seen mixed quailty.

I decided to go to JKM whom do the work I cannot on the car.

Pics below to show the detail on my exhaust all of which is V-BAND fitment.

They will carry this work on any car but the car will need to be left with them for this to be acheived inthe best possible way.

I can say I have not had a single issue with noise nor knocking or banging or blowing etc.

Top notch system with sound and finish



Turbo Damper also they crafted

[Rippers]

Luca that looks very very basic compared to what H&S did on mine but the welds do look very nice

[luca]

You have all that 4wheel drive marlarky to contend with underneath, mine is able to pretty much run straight down the middle and then over beam.

[jeardley]

Spoke to H&S this morning...... quoted £1100 plus the VAT for twin pipe system (internal wastegate.)

Gonna be mid sept

[Mike Rainbird]

Spoke to H&S this morning...... quoted £1100 plus the VAT for twin pipe system (internal wastegate.)

Gonna be mid sept

Is that when your car will be ready, or the lead time for them to fit you in?

[jeardley]

Is that when your car will be ready, or the lead time for them to fit you in?

They have a 4 week back log... if i booked in today they said they could get it in mid august but i'm away til beginning of sept..... and tbh i dont think my car will be ready till mid sept so thats the target.

they want it down there for a week