rear driveshaft bolt sizes

[richyx]

anyone know the size of the bolts that hold the rear shafts on

i need toorder some alls iknow there m8

[cozzylee]

Looking at crankshafts I have and have one that is ground to .20 on big end and main is standard

Anyone had experience or bad experience...

[ksa-cossie]

Anyone know which sizes ? Pretty sure it's AN -12 but what threads ?

[c20tbo]

Guys,

Is the standard intercooler (i think 70mm) hose sizes ok for a cosworth at 500bhp or maybe slightly above? Or is it beneficial to go...

[daveescos]

Trying to get hold of a set of monte reps and was just looking for what tyre sizes to use....i had in mind 225/40/18 would this be ok?
Thanks for...

[Billy_RS]

Long story short...

I've only got a small amount of room in the latest project car to fit a brake servo.

Ideally I want...

[ossie cossie]

looking at getting some 295/30 x18 tyres for the rear of my track car Toyo R 888 to match the fronts, these are 255/35 x 18 Toyo R 888,s. I looked on...

[gizmo 5]

anyone running 35 profile on their 18" rims

40's on my rondells but have a set of good 225-35's tyres there that i might put...

[M K]

The 4 bolts that secure the rear prop to rear diff flange, can anyone tell me size, pitch and length these need to be please?

They look...

[escosgaz]

i have old style mos on my car wich are 8 x 18 and et 15 and curently on toyo t1s 225/35/18s
wanting to order sum new tyers can i get 235 wide or...

[B13 JUS]

can anyone tell me the thread sizes of a escort cosworth fuel filter?
one holse measure 14mm and the other is 10mm.
i've sure one is m14x1.5??...

[cozzylee]

is there anybody on here that could please tell me if my crank is good for upto a 500bhp motor mains are measuring 56.25 and big ends are 52.00:dunno...

[M K]

Does anybody know the thread sizes for the 2 fittings on a Tial 44mm external wastegate?

I am using -4 on my air injectors and want -4 fittings...

[M K]

Got myself a set of air injectors but want to replace some of the fittings as they are a bit battered, all four threads in the blocks are the same and...

[Dave H]

My passenger side mirror is about 8mm wider than the drivers side and the glass itself is about 5mm wider. Is this normal or have i got a rogue mirror...