Originally posted by Dave
View Post
Announcement
Collapse
No announcement yet.
Escort engine monitor
Collapse
X
-
I'll probably have one off you, I bought one of those IECS ones but never fitted it as it was in fucking kit form!!! Who the fuck expects a customer to solder their own wiring to get the product to work? Waste of £400 if you ask me
- 1 like
Comment
-
Originally posted by James @ Auto Dynamix View Post
there is the hope we can get a version to work on the small turbo but that’s not easy to do.
Comment
-
Originally posted by Dave View PostI'll probably have one off you, I bought one of those IECS ones but never fitted it as it was in fucking kit form!!! Who the fuck expects a customer to solder their own wiring to get the product to work? Waste of £400 if you ask mesigpic
Built by my self dp motorsport 700.6bhp 520ftlb efr9180 2.4bar m.a.d mapped flat out is the only way
Comment
-
The L8/P8 Pectel version is working now, so that one won't be too long before its released, the P8 std firmware one is working fine and we have sold plenty of these units along with the Lancia and Alfa Units,
Small Turbo one is something we will try and get working, but its not an easy one to do.
The guy who makes them has relocated, so we have had a bit of a delay with them, but we are back on track now.
Comment
-
Originally posted by James @ Auto Dynamix View PostThe L8/P8 Pectel version is working now, so that one won't be too long before its released, the P8 std firmware one is working fine and we have sold plenty of these units along with the Lancia and Alfa Units,
Small Turbo one is something we will try and get working, but its not an easy one to do.
The guy who makes them has relocated, so we have had a bit of a delay with them, but we are back on track now.
i am living in Italy, and I am owning a small turbo, if I can help as tester with my car as I am running completely original t25 ecu
- 1 like
Comment
-
Completely standard ECU on a Std Chip, if its changed and a different firmware is used it would need the pectel version, but may still work if the firmware used was standard,
The P8 usually needs a solder mod done inside to stream data, but on the std firmware they are plug and play with no mod required, the mod would have to be done on the pectel unit.
Comment
-
Originally posted by James @ Auto Dynamix View PostCompletely standard ECU on a Std Chip, if its changed and a different firmware is used it would need the pectel version, but may still work if the firmware used was standard,
The P8 usually needs a solder mod done inside to stream data, but on the std firmware they are plug and play with no mod required, the mod would have to be done on the pectel unit.
Thanks.
Comment
-
Available now!
https://shop-autodynamix.co.uk/c/rs-...h/tuning-parts
Took a while to get them sorted.
https://www.youtube.com/watch?v=p2JIWD7PdqM
- 1 like
Comment
Comment