If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Gav - was your's the 3 door that was on the ramps a few weeks back? If so I had a good look around whilst mine was in for a set-up about a month or so back..
No mate was not my car..
I have just had a new engine done by Harvey so was down saturday to see it mapped on the dyno and take it home to fit
The ecu was throwing a wobbly as the data stored in the eeprom (where the ecu stores the fuelling adjustments etc) was conflicting with what the new chip was trying to do - or something like that! No issues with the car other than that I'd changed the T piece in the actuator hose without realising there was a restrictor in it.
Spec of engine is all standard except injectors (light blues), actuator and MAP sensor. Also fitted a breather and wasted spark setup on top of the obligatory uprated fuel pump.
Comment