Tweet
wooooow 
thx for answers
Hmm my monitor don't click
but i think this should be no problem to fix...
Can i made a "port" to the loom i have to connect the monitor?
for the wasted spark i need no amplifier?
thx for answers Hmm my monitor don't click
but i think this should be no problem to fix...Can i made a "port" to the loom i have to connect the monitor?
for the wasted spark i need no amplifier?
Originally posted by SCS j1mbo
View Post
1. Yes that is a t6
2. That monitor should click between each position
3. That is an anti lag valve
4. That is a boost pot and has to be wired into the hairbrush plug
5. That sensor is a very expensive NTK wideband which you can use to look after your engines fuelling in conjunction with the t6
6. That is a conversion loom for coil pack to a standard car. You will not need this with t6
7.as above look like circuit breakers
8. Unless your loom has the other CPC plug on you will not be able to connect the monitor
9. That is a mapping lead, it goes from a rs232 port on a laptop to the jack plug on the loom
10.the boost pot allows you to have four different boost positions
11. As above, of your look does not have the plug on you cannot use the monitor.
12. That plug on the monitor is offer for egt or a pressure take off if I'm not mistaken for the readout on the monitor.
Hope that is of some use. If you need any other help give me a shout, I work with these systems all day every day
2. That monitor should click between each position
3. That is an anti lag valve
4. That is a boost pot and has to be wired into the hairbrush plug
5. That sensor is a very expensive NTK wideband which you can use to look after your engines fuelling in conjunction with the t6
6. That is a conversion loom for coil pack to a standard car. You will not need this with t6
7.as above look like circuit breakers
8. Unless your loom has the other CPC plug on you will not be able to connect the monitor
9. That is a mapping lead, it goes from a rs232 port on a laptop to the jack plug on the loom
10.the boost pot allows you to have four different boost positions
11. As above, of your look does not have the plug on you cannot use the monitor.
12. That plug on the monitor is offer for egt or a pressure take off if I'm not mistaken for the readout on the monitor.
Hope that is of some use. If you need any other help give me a shout, I work with these systems all day every day
he will sort and check all for me 
Comment