Announcement

Collapse
No announcement yet.

ive got some saving to do!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by all star 680 bhp View Post
    scrap the shell it sounds as if its fooked, get an other escort shell and swop id over , scrap your onw .

    job done

    thanks steven
    what you mean is...buy a shell with i.d, swap bits over, sell your car with your i.d.....job done.

    Dave.

    Comment


    • #17
      just sell the car and buy a better one

      far easier

      Comment


      • #18
        Get pics up of the areas needing repaired as that's some price

        Comment


        • #19
          Originally posted by RS 500 Registrar View Post
          just sell the car and buy a better one

          far easier
          i agree as i dont think ive got time to do it for ya!
          sigpic

          Comment


          • #20
            Originally posted by POLARIS ESCOS View Post
            just buy francos old shell for 5k and bolt all your bits to it
            That's only a grand saving thoughand I thought Jason said it could do with painting of have I got that wrongcould have your shell repaired and painted including underside at same timebut lot of work though sell up and spend the extra 6k on a good one and save yourself the hassle
            sigpic
            MAD tuned, DP engine, 530 bhp 480 lbft, autronics, anti lag, EFR 7670,

            Comment


            • #21
              Originally posted by the youth View Post
              as said chepar in this case is not always better! someone like gaz is a far better bet IMO

              steve
              if it were me id give gaz a shout and see what he says. the last time i spoke to Aston they were charging 150p/h for resto work
              xflow way to go!

              Comment


              • #22
                Originally posted by Cossie col View Post
                That's only a grand saving thoughand I thought Jason said it could do with painting of have I got that wrongcould have your shell repaired and painted including underside at same timebut lot of work though sell up and spend the extra 6k on a good one and save yourself the hassle
                Thing is,if I go that route,who would want to buy it in that condition if I'm not happy with it.. if I re-shell it,its no longer my car... Just wouldn't be the same.I've not got the time to strip it,and I don't want to break it... Think ill speak to either gaz or mark first.. but without the car infront of them,its impossible to say what it will cost..

                Comment


                • #23
                  Originally posted by Cossie col View Post
                  That's only a grand saving thoughand I thought Jason said it could do with painting of have I got that wrongcould have your shell repaired and painted including underside at same timebut lot of work though sell up and spend the extra 6k on a good one and save yourself the hassle
                  Thought he said it could just do with a machine polish was good enough for a Mag feature not so long ago so can't be too bad i wouldn't have thought

                  Comment


                  • #24
                    I'd speak to escos gaz and see what he quotes, very reasonable and a great painter

                    Comment


                    • #25
                      Originally posted by SCS j1mbo View Post
                      I'd speak to escos gaz and see what he quotes, very reasonable and a great painter
                      I've only heard good things about gaz's work... Thing is,where he's located,I could be 400 down just to get the car trailered to him... Then I'd have to get it back... Decisions,decisions..

                      Comment


                      • #26
                        Originally posted by john trott View Post
                        I've only heard good things about gaz's work... Thing is,where he's located,I could be 400 down just to get the car trailered to him... Then I'd have to get it back... Decisions,decisions..
                        As your down that neck of the woods, Give Trevor @ Stage1motorsport a call.


                        http://www.stage1.org.uk/indexmotorsport.htm
                        xflow way to go!

                        Comment


                        • #27
                          Originally posted by john savage View Post
                          As your down that neck of the woods, Give Trevor @ Stage1motorsport a call.


                          http://www.stage1.org.uk/indexmotorsport.htm
                          Could be an option,thanks john. Where exactly are they based? Not too clear on the site.

                          Comment


                          • #28
                            Originally posted by john trott View Post
                            Could be an option,thanks john. Where exactly are they based? Not too clear on the site.
                            Trevor is down Cornwall, but he travels all over and can collect from you as well.
                            xflow way to go!

                            Comment


                            • #29
                              sorry i missed your call john pls call me back

                              Comment


                              • #30
                                How far are you from Dave Pritchard (cossiedavid)? I've seen some of his work and it's from the top drawer

                                Bollox to paying Aston prices, you think Cosworth tax is dear!!
                                XYZ Fabrications
                                Bespoke, custom and low batch quantity cnc profiling, engraving and fabriactions, 07917757695

                                Comment

                                Working...
                                X