Originally posted by Turbo Lag
View Post
Announcement
Collapse
No announcement yet.
300mm rear brake conversion
Collapse
X
-
-
Originally posted by Turbo Lag View PostAny news
- 1 like
Leave a comment:
-
Originally posted by dingla rs View Poststrange one mine is 4x4 escort cosworth running gear just in a focus ,sensor still fits ,just don't run them now as running a modded abs loom ,only thing I had to do is trim a tad off the dust shield for the bolts on bracket the plate bolts infront of the dust shield
Leave a comment:
-
Originally posted by coswurv View PostI mean the tab part of the backing plate, in front of were the abs sensor mounts, the gap between that tab and the rear of the hub, there is defo no room on mine to fit a 6mm plate in between them, I'm gonna have to trim that tab off and sit the bracket just above the abs sensor.
This tab here
http://i777.photobucket.com/albums/y...laa/006-36.jpg
Leave a comment:
-
I mean the tab part of the backing plate, in front of were the abs sensor mounts, the gap between that tab and the rear of the hub, there is defo no room on mine to fit a 6mm plate in between them, I'm gonna have to trim that tab off and sit the bracket just above the abs sensor.
This tab here
http://i777.photobucket.com/albums/y...laa/006-36.jpg
Leave a comment:
-
Originally posted by coswurv View PostI had a look at mine today and going by your pics, your brackets must be ever so thin to be able to fit in between the hub and the backing plate as shown in your pics on pf, they must be like 3mm plate and to me that seems way to thin because there is no way anything thicker would fit on mine.
6mm min thick plenty enough for the job I don't get what you mean there load of room I made mine with a backing plate on ?
Leave a comment:
-
Originally posted by dingla rs View Postyou need widen the carriers as they 24mm thick new discs ,14mm spacers and quite easy to make the brackets id measure mine but its 300miles away getting wiring done
Leave a comment:
-
you need widen the carriers as they 24mm thick new discs ,14mm spacers and quite easy to make the brackets id measure mine but its 300miles away getting wiring done
Leave a comment:
-
Looking good if someone can get some brackets made up (Dave ?)
PS just been to PF and it says I last visited two years ago
Leave a comment:
Leave a comment: