Drive shaft overhaul

[NSR500V]

Hi everyone.

My front drive shaft UJ's have started to give up, the drivers side in a large way. I see there are complete shafts available...

[bestall]

Had the car jacked up today to clean the wheels and now it's back on the ground I'm getting a knocking noise on full lock when driving.. I can physically...

[bestall]

Hi

Can anyone tell me the ford part numbers for the driveshaft gaiters?

Want to know front and rear, inner and outers. ...

[Escos Jam]

Are there spacer that goes between the prop shaft center bearing and the floor?? It's been a while since I removed it and I've forgot how it all goes...

[Villacas]

I have a doubt with my 3.9 front differential assembly.

The shaft not fit in the same position than the original diff of my car. And is...

[Tore_TJ]

Bought and fitted a new prop shaft donut from Burton just for the sake of having new parts in there and it's ripped itself to shreds after a few first...

[kjc300]

Just about to do my cam shaft oil seals but have never fitted the O-rings with them before. Got some this time but don't know where they go :cry...

[sydneyvon]

Hello Chaps

Does any one know where I could fine these.

http://passionford.com/forum/general...-discussion/22...

[neo1]

Hi guys I'm having a hells own job getting the near side front joint back onto the sump with the circlip fitted the drivers side flew in but I'm unsure...

[cossieste]

Hi all ive just rebuilt my engine and come to start it but im unsure tha auxillary timing is correct. I have aligned the rotar with the dot on the plastic...

[cozzylee]

just on with fith fitting the front shafts in the escos.One has a groove for a clip...(but no clip on it ) and the other has no groove can anyone tell...

[bluebones]

hi, does anyone know where i can get the washers that sit on the face of the rear drive shaft for a 2wd,think there is 16, 4 to each side of the shaft...

[c20tbo]

As per title,

Anyone no what cv boots (inner/outer) gen wrc cosworth rear shafts use, looking to replace mine and refurb the shafts....

[MalZon]

Hey mates,

Hope its ok what a Sierra Cosworth driver asks a question in here

Is there anyone who broke the Main Shaft in...

[M K]

Just about to bolt up the 2nd hand gearbox I bought from Tom on here, no knocks or noises in car etc but as I'm new to cossies I wanted to ask is play...