the problem is if you buy one of these you have no idea whats been done to it,there could be wires missing or bodged or badly repaired etc it must be a nightmare
Announcement
Collapse
No announcement yet.
BT vs ST loom
Collapse
X
-
Originally posted by The Radman View Postthe problem is if you buy one of these you have no idea whats been done to it,there could be wires missing or bodged or badly repaired etc it must be a nightmare
This is what i have now i think everything is better than this.
Comment
-
-
Something’s not right here, i have owned my ST car since 2000 and the main reason why i never swapped it to BT was the engine loom was part of the cars loom and it would require either a lot of cutting out or leaving the loom and adding a BT loom as well. Either way it would bastardize the car.
I know this was a while ago but I still remember looking at my loom like 5 years ago thinking how to get my petal T6 loom in there.
Edit
I know i asked the question before > https://www.escortrscosworth.com/for...928#post780928
So some of the loom is separate but there is quite a lot that is in the cars main loom
Comment
-
Originally posted by PAUL V View PostSomething’s not right here, i have owned my ST car since 2000 and the main reason why i never swapped it to BT was the engine loom was part of the cars loom and it would require either a lot of cutting out or leaving the loom and adding a BT loom as well. Either way it would bastardize the car.
I know this was a while ago but I still remember looking at my loom like 5 years ago thinking how to get my petal T6 loom in there.
Edit
I know i asked the question before > https://www.escortrscosworth.com/for...928#post780928
So some of the loom is separate but there is quite a lot that is in the cars main loom
I always thought that there is separate loom for engine /head and block/ and everything else connected to ecu is together with the rest of the car loom. And i am now sure that i am right.
My idea is to find complete engine bay + engine loom and i hope it can be fitted on its own as otherwise i’ll have to change complete car loom
Comment
-
-
Originally posted by jsa View Post
Only good for parts, that second one. Chopped ends all over the place.
There is engine loom missing, engine sub loom actually.
Is everything else here ?
Comment
-
I don't see the EDIS connector, or the ABS connector.
Near impossible to say with certainty all is there from the pics.
Do you know what the cut wires are?
The engine subloom plugs into two 12 pin connectors in your second pic.Cheers
John
EsCos - Turning dinosaurs into smiles.
Comment
Comment