who makes the ab07 cams?

[lunes86]

I have TOAB07 kent cams spec ...... for my future I want to ride in BD16 and BD14 ex, with GT30, I will be better and have more power at low revs ...

What size of GT30?

[driven7]

gt3071r, but I have to decide between one of these housings 0.63, 0.82, 1.06, which will be more progressive and start from below?

[lunes86]

gt3071r, but I have to decide between one of these housings 0.63, 0.82, 1.06, which will be more progressive and start from below?

Better is to ask your mapper about the different housing sizes.

On another hand, with a GT3071R, a BD16 in. & BD14 ex. seems a bit excessive to me if you want power/torque at low revs.


Regards!!

[Dave]

Ordered my AB07 cam this morning.

How much Kev if you don't mind me asking?

I neeeeeeeeed more power

[POLARIS ESCOS]

think there about £250 dave

[driven7]

which cams work best at low rev. with GT3071r? but I think more important to choose a proper housing .... thanks

[Loader]

thanks mate

im gona wait for the results mark gets as i really fancy going gt30 on a std engine

Sounds interesting , which gt 30 is it ?

[Dave]

think there about £250 dave

Cheers Graham

[richyx]

Sounds interesting , which gt 30 is it ?

dont know mate, i was looking at the gt3076 but was told the 71 would be better

dont even know what the difference is plus i dont know wether to go external or internal wastegate

[Loader]

having read what mark shead replied on my thread about the ab07 cams, who makes them? so i can get a rough price please

Which thread is was this mate ?

[Tore_TJ]

dont know mate, i was looking at the gt3076 but was told the 71 would be better

dont even know what the difference is plus i dont know wether to go external or internal wastegate

Main difference is the 3071 has a 71mm compressor wheel compared to the 76mm wheel in the 3076.

Bigger compressor wheel on the same diameter exhaust wheel means a slower turbo in most cases, depending on back housing of course.

[richyx]

so a bit more lag then, i couldnt care less about lag if im honest

loader heres the thread

http://www.escortrscosworth.com/foru...ad.php?t=17642

[Loader]

cool , cheers.

[dom123]

gt3071r, but I have to decide between one of these housings 0.63, 0.82, 1.06, which will be more progressive and start from below?

most tuners will recommend the 0.82 mate, the 0.63 will get very hot and the 1.06 is to big... and laggy

[driven7]

but I read that when smaller load is before the turbo, now that I've recommended the 0.82 I have doubts