Small turbo with EFR

[mark shead]

Hello

Just thought I would post up what is the next EFR project and needing to keep it looking as close to stock as poss,

Not sure if the heat shield will fit yet but giving it a go,

Other than the Ecu Turbo and fuel system the car is stock and hoping to push 410hp and 420ftlb.
It will be a couple of weeks before its ready.

Mark

[hughy]

This is awesome the power that is coming from just theses upgrades, great work Mark keep it up, will the standard box and diff's be OK if you weren't lunching?

[Simon T]

Thats ace - what intercooler is it running? And does it still have aircon?

[3903gareth]

410bhp!!! Nice power figures how reliable with standard internals etc ???

[mark shead]

Thats ace - what intercooler is it running? And does it still have aircon?

Standard intercooler and it has aircon.

Mark

[mark shead]

410bhp!!! Nice power figures how reliable with standard internals etc ???

Other than standard style headgasket they are fine and reliable if well looked after.

Mark

[zivac]

which efr series it is ?

I am planning to buy a efr 7670 0.83/t3

[mark shead]

which efr series it is ?

I am planning to buy a efr 7670 0.83/t3

It's a 7064 T4 twin scroll .92 housing.

Mark

[cossyking]

This turbo is awesome got one on my s1 best upgrade anyone could have like driving a small turbo escort lag wise with awesome power and responce

[3903gareth]

Seriously impressive

[Regan_M]

Would there be a rough total cost for this as a package, drive in drive out etc?

[JHS]

What sort of power is this turbo capable of if engine internals and intercooler was upgraded?
Keeping it on a cast exhaust manifold...

[Adamski]

What sort of power is this turbo capable of if engine internals and intercooler was upgraded?
Keeping it on a cast exhaust manifold...

Can't be fitted on the oe manifold...

[Mark King]

How come it has adjustable cam pullys?i thought it was std internals.

[ESCORT2483]

hi mark ... i know this is mattys car ,, but i sold it to matty , as it was mine ... just to give you heads up .. i fitted new group a head gasket ,, not long before i sold it to matt .. just be aware , i used arp head stud and nut kit , instead of standard strech bolts ..[i have heard they can crack blocks with too much boost] .. also i did fit the verniers , but the cams are standard , and i timed it as standard ..[ reason i fitted the pulleys was once it had a alloy cam belt cover , which had the holes in so you could see the pulleys ,, and they looked nicer than standard ones] any other info you need i will be pleased to help ..
regards
mark