ABS Sensors

[jsa]

Will soldering alter the impendence though? Where a crimped on connector wont? I know if the impendece is out it'll trigger the warning light.

Both methods done right will have next to no effect on impedance.

Done poorly both can be rubbish.

[the youth]

right message back this morning with some good news, although it doesn't look like it's going to be a quick process
The next question I have, who has a perfect working front and rear sensor they will be willing to part with? If you have please let me know

reply below

Hi Ben

We have manged to find a supplier that will develop these however this will take time due to the processes we have to follow.

1.obtain O.E sample
2 take data from O.E sensor
3.send to manufacture
4 allow time for development
5 obtain samples to test against O.E data
6 place initial order
7 allow time to arrive

This can be a lengthy process i will keep you updated.

I've got a brand new esc cos rear sensor I could borrow you to use, I only have saph fronts tho
actualy the rear plug is the same as saphs anyway so you could have one of my spares

Steve

[Ben Purnell]

Hi Steve,

Ideally I wouldn't want to borrow one just in case I can't get it back or something happens to it, is the front saff the same length as the escort rear, even if longer would it work?

Ben

[cos838]

seeing this is good news ... i need a set of rear's asap ...

[Darrenaf]

right message back this morning with some good news, although it doesn't look like it's going to be a quick process
The next question I have, who has a perfect working front and rear sensor they will be willing to part with? If you have please let me know

reply below

Hi Ben

We have manged to find a supplier that will develop these however this will take time due to the processes we have to follow.

1.obtain O.E sample
2 take data from O.E sensor
3.send to manufacture
4 allow time for development
5 obtain samples to test against O.E data
6 place initial order
7 allow time to arrive

This can be a lengthy process i will keep you updated.

Ben you can have mine, ABS worked before i stripped the car, only problem is that the fronts are stuck in the hubs, that may be a problem although you could have the whole lot if required as i have got some new hubs ordered with MK.

[the youth]

Hi Steve,

Ideally I wouldn't want to borrow one just in case I can't get it back or something happens to it, is the front saff the same length as the escort rear, even if longer would it work?

Ben

I'd have to measure them , the saph ones are accessible in the garage, the esc cos one is in the roof space above the escort, would need to dig it out next week to measure.

Steve

[Joe-Tait]

Fronts are 873mm

Rears are 800mm

Let me know if you need any other dimensions Ben

[cos838]

Any news on this guys ??

[Ben Purnell]

Both myself and the company are struggling to get hold of some good used ones to take all the readings from, if anyone has any please do get in touch.

I can't guarantee they will be returned so if you don't want to donate them, I will be willing to pay for them, please please anyone with some they don't mind parting with let me know

[jsa]

What readings do they need?

[Ben Purnell]

That's a good question John, I guess the impendence and any other reading that will be pertinent to making new ones

[Darrenaf]

Ben as discussed i can put in the rears but the fronts are stuck, although might have a plan to get them out over the weekend, i will keep you updated

[rs gus]

I have some sapphire fronts if I can get them out

[Scott_Rst]

Only just found this thread!

Anything happening with this?

Im looking for fronts and rears!

[mayo rs]

sensor

Check out ebay item number 321228357440 ,